Call us toll-free at: 877-372-3741

Catalog
Search
Survey
What is your primary interest in Video Camera Equipment?
Printer friendly version Printer friendly version

VADT14130WDM-R3 VIDEO TX / 2 CH DATA TCVR / 2 CH AUDIO TCVR + SYNC, SM, 1 FIBER, RM

$2,632.50 $1,499.95
You save: $1,132.55 (44%)
Product code (SKU):  IFS-VADT14130WDM-R3
In stock: yes
Weight: 2 lbs
Qty:  

The IFS VADT14130WDM video, audio and data transceiver supports the simultaneous bi-directional transmission of video, audio and data over one multimode fiber optic cable. The modules use frequency modulation (FM) for superior transmission of video, data, and balanced or unbalanced line-level audio (2.2 V pk-pk). The modules are universally compatible with major CCTV camera manufacturers and support RS-232 and RS-422. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The modules incorporate power data transmit, data receive, audio transmit and audio receive status indicating LED’s to monitor proper system operation. This module is the rack mount version.

Features

FM Video Transmission reduces ghosting, jitter and cross-talk between channels, providing superior video transmission
NTSC, PAL, SECAM Compatible
Automatic Resettable Fuses on all Power Lines
600 Ohms Audio Input Impedance
Transmits Bi-directional Balanced or Unbalanced Line-Level Audio (2.2 Volts Peak-to-Peak)
Transmits Bi-directional RS-232 and RS-422 Data Interfaces
Data rates up to 100 kbps
Transparent to Data Encoding/Compatible with Major CCTV Camera Manufacturers
NTCIP Compatible
Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
No In-field Electrical or Optical Adjustments Required
Power Status Indicating LED to Monitor System Performance
Hot-Swappable Rack Modules
Full Color Compatibility 

Specifications

Model: VADT14130WDM-R3
Video Input/Output: 1 Volt Pk-to-Pk
Bandwidth: 5 Hz - 6.5 MHz
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >60 dB
Data Interface: RS-232, RS-422
Data Format: NRZ, NRZI, Manchester, Bi-phase
Data Rate: DC-100 Kbps (NRZ)
Audio Max. Input/Output Signal: 2.2 Volt Pk-to-Pk
Audio Bandwidth: 20 Hz - 20 kHz
Wavelength 850 nm and 850/1310 nm, Multimode
Connectors Optical: ST
Connectors Data: Terminal Block with Screw Clamps
Connectors Video and Sync: BNC (Gold Plated Center-Pin) 
Number of Rack Slots: 2
Number Of Fibers : 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Max. RG59 Cable Length: 750 ft.
Circuit Board: Meets IPC Standard
Size Rack Mount: 7.0 x 5.0 x 1.0 in., 17.8 x 12.7 x 5.1 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

Any questions?

Please use the following form to request information.

Your name:

Email

Please specify your question about VADT14130WDM-R3 VIDEO TX / 2 CH DATA TCVR / 2 CH AUDIO TCVR + SYNC, SM, 1 FIBER, RM:


Type the numbers you see in the picture below
code

(empty)
 
Blog / News
Subscribe for email newsletter (blog):
or RSS 2.0
For your convenience, AESI accepts the following forms of payment:
Credit Cards
Acceptance Mark
Credit Card Merchant Services

Powered by WebAsyst Shop-Script