The IFS VR1001 dual video receiver detects two independent AM video signals in one module on two independent multimode fiber optic cables. The module is not a multiplexer. The module is ideal for smaller CCTV installations and the rack-mount version can be used to double the fixed video capacity of the R3 rack for up to 28 independent video channels per card cage. The modules utilize manual gain control. The receiver is compatible with the IFS VT1101M, VT1101M-AC, and VT1001 series transmitters. Plug-and-play design ensures ease of installation. The module incorporates power and sync detect status indicating LED’s for monitoring proper system operation. This module is the rack mount version.

Standard Features
 
AM Video
NTSC, PAL, SECAM Compatible
Full Color Compatibility
Two Independent Receivers in One Module
Can be Used to Double the Fixed Video Capacity of an R3 Card Cage
Plug and Play Design for Ease of Installation
Power and Sync Detect Status Indicating LED’s to Monitor System Performance
Hot-Swappable Rack Modules
Automatic Resettable Fuses on all Power Lines

Specifications
 
Model: VR1001-R3
Video Output: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <596
Differential Phase: <5°
Tilt: <196
Signal-to-Noise Ratio (SNR): 60 dB typical, 54 dB minimum
Wavelength 850 nm, Multimode
Receiver Sensitivity 1 ?w (-30 dBm)
Transmitter Output 25 ?w (-16 dBm)
Number Of Fibers: 2
Optical: ST
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†