The IFS VR1100 video receiver detects an AM video signal on one multimode fiber optic cable. The receiver utilizes automatic gain control (AGC) and is compatible with the IFS VT1101M, VT1101M-AC, and VT1001 series transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The receiver incorporates power and AGC status indicating LED’s for monitoring proper system operation. This module is the rack mount version.

Standard Features
 
AM Video
NTSC, PAL, SECAM Compatible
Full Color Compatibility
Full Range Automatic Gain Control (AGC)
No In-field Electrical or Optical Adjustments Required
Power and AGC Status Indicating LED’s to Monitor System Performance
Hot-Swappable Rack Modules
Automatic Resettable Fuses on all Power Lines 

Specifications
 
Model: VR1100-R3
Video Output: 1 volt pk-pk (AGC controlled)
Bandwidth: 5 Hz - 10 MHz (At 6 dB Attenuation)
Differential Gain: <596
Differential Phase: <5°
Tilt: <196
Signal-to-Noise Ratio(SNR): >55 dB at 10 dB Attn., >60 dB at 7 dB Attn.
Wavelength: 850 nm, Multimode
Receiver Sensitivity: 1 ?w (-30 dBm)
Transmitter Output: 25 ?w (-16 dBm)
Number Of Fibers: 1
Optical: ST
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
Max. RG59 Cable Length: 750 ft.
Current Protection: Automatic Reset table Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Rack Mount: 7.7 x 5.0 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†