The IFS VR7420-2DRDT video receiver/data transceiver utilizes state-of-the-art 8-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for Medium-Haul Video Transmission. These environmentally hardened units provide transmission of four independent video channels and two bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. Completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera system. Data channels can be set independently for RS-232, RS-422 and 2 or 4-wire RS-485 with tri-state support. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. LED indicators are provided for rapidly ascertaining equipment operating status. This module is the rack mount Version.
Standard Features
8-Bit Digitally Encoded Video Transmission Transmits 4 Real-Time Color Video Signals and 2 Bi-Directional Data Signals on 1 multimode Optical Fiber
Supports RS-232, RS-422, and 2 or 4-wire RS-485 with Tri-State Data Interfaces
LED Status Indicators Provide Rapid Indication of Critical Operating Parameters
Exceeds All Requirements for RS-250C Medium-Haul Transmission: Extremely High Video Performance
Exceptionally Low Video Distortion with Zero Performance Variation vs. Optical Path Loss
Ideally Suited to Networks Requiring Multiple Physical Layers Where Video Degradation May be a Problem
Directly Compatible with all NTSC, PAL, or SECAM CCTV Camera Systems
Wide Optical Dynamic Range: Optical Attenuators are Never Required
NTCIP Compatible
Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Robust Design Ensures Extremely High Reliability In Unconditioned Out-of-Plant Environments
Solid-State Current Limiters on All Power Lines Provide Equipment Protection
Specifications
Model: VR7420-2DRDT-R3
Video Input: 1 volt pk-pk (75 ohms)
Input/Output Channels: 4
Bandwidth: 10 Hz - 6.5 MHz
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 60 dB @ Maximum Optical Power Loss
Data Channels: 2
Data Format: RS-232, RS-422, 2-w or 4-w RS-485 with Tri-State, Manchester, Bi-phase
Wavelength: 1310/1550 nm Multimode
Optical emitter: Laser Diode (all models)
Number of fibers: 1
Optical: ST
Data: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
Number of Rack Slots: 3
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Rack Mount: 7.7 x 5.0 x 3.0 in., 19.6 x 12.7 x 7.5 cm
Shipping Weight: < 2 lbs./0.9 kg
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
