The IFS VT1001 is a dual video transmitter that provides transmission of two independent fixed video signals in one module utilizing AM modulation on two independent multimode fiber optic cables. The module is not a multiplexer. The module is ideal for smaller CCTV installations and the rack-mount version can be used to double the fixed video capacity of the R3 rack for up to 28 independent video channels per card cage. The VT1001 is compatible with the IFS VR1000, VR1001, VR1100, and VR2100 series receivers. Plug-and play design ensures ease of installation requiring no electrical or optical adjustments. The module incorporates a power and channel A and B sync detect status indicating LED’s for monitoring proper system operation. This module is the rack mount version.

Standard Features
 
AM Video Transmission
NTSC, PAL, SECAM Compatible
Full Color Compatibility
Two Independent Transmitters in One Module
Can be Used to Double the Fixed Video Capacity of an R3 Card Cage
No In-field Electrical or Optical Adjustments Required
Power and Sync Detect Status Indicating LED’s to Monitor
System Performance
Distances up to 2.5 miles (4 km) Without Repeaters
Automatic Resettable Fuses on all Power Lines
Hot-Swappable Rack Modules

Specifications
 
Model: VT1001-R3
Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 10 MHz
Differential Gain: 5%
Differential Phase: 5°
Tilt: 1%
Signal-to-Noise Ratio (SNR): 60 dB typical, 54 dB minimum
Wavelength 850 nm, Multimode
Receiver Sensitivity 1 ?w (-30 dBm)
Number Of Fibers 2
Optical: ST
Video: BNC (Gold Plated Center-Pin)
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Rack Mount: 7.7 x 5.0 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: 2 lbs./0.9 kg
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†