Call us toll-free at: 877-372-3741

Catalog
Search
Survey
What is your primary interest in Video Camera Equipment?
Printer friendly version Printer friendly version

VT4930WDM-R3 FM VIDEO TX / DATA TCVR (FSK) SM LASER, 1 FIBER, RM

VT4930WDM-R3 FM VIDEO TX / DATA TCVR (FSK) SM LASER, 1 FIBER, RM
$1,973.75 $1,299.95
You save: $673.80 (35%)
Product code (SKU):  IFS-VT4930WDM-R3
In stock: yes
Weight: 2 lbs
Qty:  

The IFS VT4930WDM video transmitter/data transceiver unit utilizes frequency modulation for high video transmission quality. These environmentally hardened units provide the simultaneous transmission of video and full-duplex data over one singlemode optical fiber and are ideal for use in unconditioned out-of-plant or roadside installations. Completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera system, all standard pan-tilt-zoom control signals including RS-232, RS-422, and 2-wire RS-485 data are supported. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. LED indicators are provided for rapidly ascertaining equipment operating status. This is the rack mount version.

Standard Features

Frequency Modulation for High Quality Video Transmission
Directly Compatible with All NTSC, PAL, or SECAM CCTV Camera Systems
LED Status Indicators Provide Rapid Indication of Critical Operating Parameters
Integrated WDM for Greater Reliability
Solid-State Current Limiters on All Power Lines Provide Equipment Protection
Wide Optical Dynamic Range: Optical Attenuators are Never Required
NTCIP Compatible
Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Robust Design Ensures Extremely High Reliability In Unconditioned Roadside Environments 

Specifications
 
Model: VT4930WDM-R3
Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 6.5 MHz
Differential Gain: <3%
Differential Phase: <3°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 60 dB Minimum @ Maximum Optical Power Budget
Data
Data Interface: RS-232. RS-422, 2-Wire RS-485
Data Format: NRZ, NRZI, Manchester, Bi-phase
Data Rate: DC-100 Kbps (NRZ)
Operating Mode: Simplex or Full Duplex
Wavelength: 1310/1550 nm, Single Mode
Optical emitter: Laser Diode
Number of fibers 1
Led indicators: Video Input Sync Presence, Transmitted Data, Received Data,
Optical Carrier Detect, Operating Power 
Optical: ST
Data: Terminal Block with Screw Clamps
Video and Sync: BNC (Gold Plated Center-Pin) 
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State Current Limiters
Max. RG59 Cable Length: 750 ft.
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH) 
Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
Shipping Weight: < 2 lbs./0.9 kg
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

Any questions?

Please use the following form to request information.

Your name:

Email

Please specify your question about VT4930WDM-R3 FM VIDEO TX / DATA TCVR (FSK) SM LASER, 1 FIBER, RM:


Type the numbers you see in the picture below
code

(empty)
 
Blog / News
Subscribe for email newsletter (blog):
or RSS 2.0
For your convenience, AESI accepts the following forms of payment:
Credit Cards
Acceptance Mark
Credit Card Merchant Services

Powered by WebAsyst Shop-Script