The IFS VT6010 multiplexer simultaneously transmits four-channels of real-time video signals over one multimode fiber optic cable. The modules utilize frequency modulation (FM) to reduce ghosting, jitter and cross-talk between channels, thereby providing superior video transmission. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The modules incorporate power and carrier detect status indicating LED’s for monitoring proper system operation. This module is the stand-alone version.

Standard Features
 
FM Design
Transmits Four Real-Time Video Signals
10 MHz Bandwidth Per Individual Channel
NTSC, PAL, SECAM Compatible
Full Color Compatibility
Reduces Fiber/Cabling Cost
No In-field Electrical or Optical Adjustments Required
Power, Carrier Detect and Four Video Presence Status Indicating LED’s for Each Individual Channel to Monitor System Performance
Automatic Resettable Fuses on all Power Lines
Hot-Swappable Rack Modules

Specification

Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 10 Hz - 10 MHz (typical)
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 55 dB (typical)
Wavelength: 850 nm, Multimode
Number of fibers 1
Optical: ST
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
Power: 12 VDC @ 400 mA
Current Protection: Automatic Resettable Solid-State Current Limiters
Max. RG59 Cable Length: 750 ft.
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: <2 lbs./0.9 kg
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†